What to Expect During the Engine Rebuilding Process

Although the large trucks used for commercial and industrial purposes are designed and built for heavy use, they are not invincible. Over time, these vehicles may develop mechanical issues due to normal wear and tear of parts. If this happens, you will need to conduct the necessary repairs to get the vehicles running at their best again.

If you are facing endless engine troubles, this is a sign that it may be time to replace your engine. But a full engine replacement tends to be extremely costly, so it might be a good idea to rebuild your engine instead.

Aside from the huge costs savings that it can help you realise, engine rebuilding also helps you to avoid engine-vehicle compatibility issues that may arise if you decide to replace your entire engine. New to engine rebuilding? Don't fret! Here's a useful guide on what the engine rebuilding process involves.

Engine Removal

No doubt, removing an engine from a vehicle can be a dreadful task, particularly on large trucks. However, professional rebuilding pros know how to make light work of the task. Equipped with basic tools and an engine hoist, they can remove the bolts that secure the engine in place and then lift the engine block out of the vehicle. 

As part of prepping your engine for removal, engine rebuilders will clean your engine to remove the accumulated dirt and grime that may make it difficult to remove bolts and other fixings that secure your engine in place. 

They will also disconnect electrical wiring and remove any detachable components, such as the radiator fan, radiator, hoses and covers before removing the engine.

Engine Teardown

Once the engine has been pulled out of your vehicle, it is dismantled part by part with each part being checked for excess wear. All dismantled parts are sorted out so that worn parts can be kept separate from the internal goodies. This way, the engine rebuilders can know what to re-use and what to replace. 

All the good parts and the engine block are then cleaned to remove any accumulated dirt and grime that may affect the performance of your engine.

Engine Reassembly

This step is basically the reverse of engine teardown. It involves rebuilding the engine part by part, starting with the parts that were removed last. All running parts are properly lubricated before being reassembled, and new parts are used to replace the defective ones.

Lifting and Putting the Engine Back in the Vehicle

Here, the reassembled engine is then lifted back into position with the hoisting equipment and secured with bolts. The wiring, as well as all removable engine parts, are then reconnected.

Engine rebuilding is a big job, especially when dealing with large trucks. For best results, you should hire a professional engine rebuilder. They will take the guesswork out of the job and provide you with the best results.

Share